E

Procedure

1)Remove the top cowling.

301012

208012

407021**

2)Remove the starter/flywheel cover by removing the bolts.

NOTE:

On a model equipped with the start-in- gear protection device (cable), disconnect the cable from the starter.

3)Prepare the engine for starting. See "STARTING ENGINE" for procedures. Be sure the engine is in Neutral and that the lanyard is attached to the engine stop switch.

On the electric start model the main switch must be on if the main switch is equipped.

EMR00001

4)To start the engine with emergency

starter rope, insert the knotted end of the rope into the notch in the flywheel rotor and wind the rope several turns clockwise. Then, give a strong pull straight out to crank the engine. Repeat if necessary.

208014

5-7