E

N

406042

503016

EMU00854

PROCEDURE FOR TILLER CONTROL MODEL

4)Place the gear-shift lever in the neu- tral position.

NOTE:

The start-in-gear protection device prevents the engine from starting except when in Neutral.

5)Place the throttle control grip in the “START” position.

6) Attach the engine stop switch lanyard to a secure place on your clothing, or your arm or leg. Then, install the lock plate on the other end of the lanyard in the engine stop switch.

w

8Attach the engine stop switch lanyard

to a secure place on your clothing, your

001105 arm or leg while operating.

8Do not attach the lanyard to clothing that could tear loose. Do not route the lanyard where it could become entan- gled, preventing it from functioning.

8Avoid accidentally pulling the lanyard during normal operation. Loss of engine power means the loss of most steering control. Also, without engine power, the boat could slow rapidly. This could cause people and objects in the boat to be thrown forward.

3-11