TILT SUPPORT BAR
The tilt support bar keeps the outboard motor in the tilted up position.
TOP COWLING LOCK LEVER
To remove the engine top cowling, turn the lock lever. Then lift off the cowling. When replacing the cowling, check to be sure it fits properly in the rubber seal. Then lock the cowling again by moving the lever upward.
1Top cowling lock lever
The carrying handle is included between the clamp bracket. The carrying handle enables you to carry the outboard motor readily with one hand after setting it up.
To set up the carrying handle, proceed as follows.
1)Place the tilt lock lever in the lock position.
2)Securely hook the arm of carrying handle end to the clamp bracket bar.
Place the tilt lock lever in the lock position while using the carrying handle. Oth- erwise, the lower casing may fall to the grand while carrying the motor.
1Clamp bracket bar