REMOTE CONTROL TRANSMITTER

1

3

2

Loading the batteries for the remote control transmitter

1 Remove the battery compartment cover.

(Press the left edge of the cover to right with a finger, and then pull it upward.)

2 Insert 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or equivalent) into the battery compartment.

* Installing the batteries improperly may cause failure.

3 Replace the battery compartment cover.

Precautions for battery use

•Insert the batteries according to the direction indicated in the battery compartment.

•Replace all batteries with new ones at the same time.

•Remove the batteries if they are weak or if the unit is not in use for long periods.

•Don’t mix normal batteries with rechargeable batteries.

English

Remote control sensor

0.2 m – 6 m (8” – 20’)

30°

30°

 

Proper use of the remote control transmitter

Aim (within the range of 60° with no obstacles) the remote control transmitter at the remote control sensor and operate as shown.

Notes concerning use

•Replace the batteries if control distance decreases or operation becomes unstable.

•Periodically clean the transmitter window on the remote control transmitter and the sensor on the main unit with a soft cloth.

•Exposing the sensor on the main unit to strong light (especially an inverter type of fluorescent lamp etc.) may interfere with operation. In this case, reposition the main unit to avoid direct lighting.

•Keep the remote control transmitter away from moisture, excessive heat, shock and vibrations.

•The remote control transmitter’s usable range is within 0.2m (8”) and 6m (20’) away from the sensor.

E-9