HOW TO USE THE BUILT-IN TIMER

➂ At ON TIME/time setting mode

English

POWER TIME ADJ

Receiver

DISPLAY TIMER 2-➂,➃

[“ON TIME” appears on the display, and soon it is changed to a time setting mode.]

Set to the time when the timer play begins by using the HOUR button and the MINUTE button.

➃At OFF TIME/time setting mode

[“OFF TIME” appears on the display, and soon it is changed to a time setting mode.]

If necessary, set to the time when you want to finish the timer play (to turn this unit off) by using the HOUR button and the MINUTE button. Even if you do not set the time, it has already been set so that the timer play finishes after 1 hour.

*The TIMER button functions also in the time (ON TIME or OFF TIME) setting mode.

3 If you will not use this unit until the timer play begins, turn the power off by pressing the POWER switch or the TIMER button.

Note

If a timer play setting is made and the power is not turned off, the source set for the timer play will begin playing when the time comes in place of the source played at that time.

To cancel the timer play setting

After the timer play is finished, press the DISPLAY button to call the current time. While the current time is displayed, press the TIMER button so that “TIMER” goes out from the display.

If it is not canceled, the system will be turned on at the same time every day, so it can be used as an alarm. However, if you will be out at that time, cancel the timer play setting.

*Unless the AC supply lead is unplugged or there is a power failure for more than 30 minutes, the time set on the timer will be retained until it is reset.

How to make time setting in the ON TIME or OFF TIME modeFor the hour:

Press the HOUR button to change the hour to a higher value. Press and hold to change continuously.

To change the hour to a lower value, while pressing the TIME ADJUST button, press the HOUR button.

For the minute:

Use the MINUTE button and operate it in the same way as you did to change the hour.

E-39