PREPARATION FOR USE

R L

(Black wire with white line → plus (+) terminal, black wire → minus (–) terminal)

RX-S50CDX-S50KXW-S70

Speaker connection

English

 

Connect each speaker wire to the SPEAKERS terminals.Cautions

•Do not let the bare speaker wires touch each other as this could damage the receiver and/or speakers.

•When connecting the speakers to the unit, be sure to connect the speaker wires properly. Do not mistake the right channel for the left channel and the plus (+) terminal for the minus (–) terminal.

•Do not connect these SPEAKERS terminals to speakers other than the provided speaker system NX-S50.

System connection

•Connect the red connector on the rear of CDX-S50 to the red socket on the rear of RX-S50.

•Connect the black connector on the rear of KXW-S70 to the black socket.How to disconnect the system connectorGrasp both sides of the connector to disconnect the connector.
To an AC outlet

Connecting the AC supply lead

•After connecting the speakers and system connectors, plug the AC supply lead into a convenient AC outlet.

•Unplug the AC supply lead from the AC outlet if the unit is not to be used for a long period of time.

E-11