Yamaha CC-50 Sleep timer operation, Using the timer and the sleep timer at the same time, POWER, POWER, SLEEP, The “, DISPLAY, Receiver, AUTO MEMO, OFF SLEEP

HOW TO USE THE BUILT-IN TIMER

POWER

Receiver

DISPLAY AUTO MEMO

		TUNER DIRECT
	1	2	3	4	5
	1	2	3	4	5
	6	7	8
	6	7	8	9	0
	A	B	C	D	E
	TIME	PROG	TAPE	EDIT	+I0
			STOP	PLAY/PAUSE	CD
	REPEAT	PRESET		A/B/C/D/E	TUNER
		DOWN	UP
	RANDOM	PLAY	STOP	PLAY	TAPE
	DECK		REC/PAUSE		PHONO/AUX
	A/B
	EFFECT LEVEL		DSP	MODE	SP/PHONES
	-	+
POWER	POWER	SLEEP	DISPLAY	VOLUME
				-	+

SLEEP

Sleep timer operation

This unit can be turned off automatically.1 Play the desired sound source.

2 Press the SLEEP button. “SLEEP” appears on the display, and soon it is replaced by “120”.

3 Press the SLEEP button repeatedly until the desired sleep time appears in the display. The display will change as described below. (Time is displayed by the minute.)

120	↑ 90 ↑ 60		↑ 30
↑		OFF SLEEP	↑
	(Sleep timer is off.)

*The original display mode will resume about 4 seconds after the selection is made.

*The SLEEP indicator illuminates to indicate that the sleep timer is on.4 The unit will turn off automatically when the preset sleep time has passed.To confirm the sleep time setting

Press the SLEEP button once. “SLEEP” appears on the display, and soon it is replaced by the remaining time of the preset sleep time.

To change the sleep time

While the SLEEP indicator illuminates, press the SLEEP button repeatedly until the desired time appears.

To stop the sleep timer operation

Press the POWER switch, or press the SLEEP button repeatedly until “OFF SLEEP” appears on the display. (The SLEEP indicator will go out.)

To set the sleep time using front panel buttons

First press the DISPLAY button to display the current time. Within 7 seconds, press the AUTO MEMORY button. Whenever the AUTO MEMORY button is pressed, the sleep time changes.

Using the timer and the sleep timer at the same time

1 Prepare timer playback. (See pages 38 and 39.)*Do not turn the power of this unit off after the timer setting is finished.2 Press the SLEEP button and set the sleep time.

When the sleep timer operation finishes, the timer will function to turn the source on at the preset time.

Notes

•Do not set the timer time so that the timer will start during sleep timer operation. (Since sleep timer operation has priority, the timer will not operate.)

•If the power is turned off by the sleep timer while playing back a CD with “ ” is illuminated on the display, when CD playback begins at the time set on the timer play setting, playback begins from the beginning of the track which had been being played back when the power was turned off by the sleep timer.

*The “ ”indicator is switched on and off by pressing the RESUME button on the CD player.

English

E-41