111
111
CVP-98/96/600
CSelect the desired track for recording......................................
Press the TRACK < or > buttons or use the data dial or [–/+] buttons
to select the track.
➔The selected track is indicated by an underline mark.
Use the LCD button at the far right to set the selected tracks to
RECORD (record enable) or OFF (record/playback disable). PLAY can
only be selected for tracks which contain data. When a track is muted,
the track number is “ghosted” (shown in lighter indication) in the dis-
play.
Song Recording
Three separate tracks can be set to record simultaneously when re-
cording keyboard parts.
If you intend to record using the Dual or Split functions, two tracks
must be record-enabled.
If you intend to use both the Dual and Split functions simultaneously,
three tracks must be selected.
If Auto Accompaniment and/or Harmony are turned on, the recording
track numbers are automatically fixed, as described below.
* If Auto Accomapniment is turned on, tracks 9 through 16 are auto-
matically record-enabled for recording the Auto Accompaniment
data. If the Harmony function is turned on, tracks 6 through 8 are
automatically record-enabled for recording the Harmony data.
When the RHYTHM button is pressed, tracks 9 and 10 are automati-
cally selected for the rhythm data. Set tracks 9 and 10 to RECORD,
PLAY, or OFF by using the LCD button at the far right.
• Track 10 (and 9, in some cases) can
only be used to record the rhythm
sound of the accompaniment style and
cannot be used to record keyboard
part. Also, the keyboard part should
be recorded on a track other than
those used for Harmony or Auto Ac-
companiment.
• When Auto Accompaniment is turned
on, Synchronized Start recording is
automatically set to stand-by.
• When the RHYTHM tracks (9 and 10)
are set to
RECORD
, the metronome will
sound to provide a timing guide in the
Synchronized Start mode.