71
71
CVP-98/96/600
Custom Style
BSelect the part and voice you want to record...................
Use the PART LCD button, the data dial, or [–/+] buttons to select the
part you want to record:
R1 Rhythm 1
R2 Rhythm 2
Bs Bass
C1 Chord 1
C2 Chord 2
Pd Pad
P1 Phrase 1
P2 Phrase 2
Playback part
At this point you can also select the voice you want to record with
(the preset voice for that part will initially be selected). For the R1 part,
only [DRUMS] voices can be used. For the R2 part, all voices except
Organ Combi. voice can be used. For the remaining parts, all voices ex-
cept [DRUMS] and Organ Combi. voice can be used.
The R1 part is initially selected and set to the record mode.
Any part you select can be set to the record mode by using the rightmost
LCD button to select “RECORD” after selecting the part (the part
number will be highlighted). Since parts other than R1 and R2 must be
cleared before they can be recorded (if the source style is a preset style or
a style loaded from the optional Style File disk) the “Clear part ?”
confirmation will appear if you select a part that contains data: press OK
to clear the part and continue, or CANCEL to abort. Only one part can be
set to the record mode. All other parts will be set to “PLAY” (part
number surrounded by box) or turned “OFF” (part number only — no
box). No indication appears for the parts that contain no data.
Recording part Part containing no data
OFF