12
12
CVP-98/96/600
Basic Operation
Virtually all of the Clavinova’s operations are done from the LCD
display. When y ou press a b utton on the panel once, the relevant
function’s display appears. Depending on the display that ap-
pears, you can conveniently perform various functions and change
values/settings by using the buttons located directly below, or to
the left or right of the LCD, and the data dial and [–/+] buttons at
the right of the LCD. Once you’re familiar with these operations,
you can easily use other functions in the same way.

LCD Display and LCD Buttons

The five buttons located under the LCD display are referred to as the
LCD buttons. These buttons are used either to select the corresponding
items displayed in the LCD or to change the values. The five buttons
located to the left and right of the LCD display are referred to as the left/
right LCD buttons. These buttons are used to directly select parameters
and settings in the LCD display.
The functions of the LCD buttons differ depending on the selected
LCD. Keep in mind that functions are enclosed in two types of rectan-
gles, one a “soft” rectangle with rounded corners, the other a “hard” rec-
tangle with 90-degree corners.
“Soft” rectangle
(with rounded corners) “Hard” rectangle
EXIT DISPLAY HOLD
PAGE