46
46
CVP-98/96/600
Setting the Effect Depth
The Effect Depth parameter lets you adjust the degree or depth of the
currently selected effect type. To set this, press R1 DPT or MIC DPT
(to highlight the corresponding parameter), and use the data dial or [–/+]
buttons.
Depending on the currently selected voice, the R1 DPT indication
may automatically change to the R2 DPT, or L DPT.
Use MIC DPT to set the Effect Depth applied to the microphone input
connected to the [MIC.] jack.
Effect Depth
• Range: 0 (no effect) — 100 (maxi-
mum)
• Basic setting: Differs depending on
the voice. (microphone = 0)
• Backup of last settings: OFF
Pressing R1 DPT or MIC DPT also advances the value. To reset the
value to the basic setting, simultaneously press the [–/+] buttons.
• If the Effect Depth is set to 0, the [EF-
FECT] lamp will not light.
You can easily restore the basic settings of the selected voice’s EF-
FECT TYPE and R1 DPT parameters by pressing RESET in the display.
Restoring the Basic Settings
R1 DPT First voice of Dual mode or right voice of Split mode
R2 DPT Second voice of Dual mode
L DPT Left voice of Split mode
The following parameters can be selected by first selecting the corre-
sponding voice from the main display of the Dual or Split modes.
Voice Effects