149
149
CVP-98/96/600
Utility
Micro Tuning (MICRO TUNING) Display — PAGE 14
The Micro Tuning Feature makes it possible to individually tune each
key of the keyboard. The created tuning can be saved to a disk and
loaded whenever necessary. The set tuning can be turned on or off at
anytime by using the left-most LCD button in this display.
ZSelect the desired key.................................................................................
Press any desired key to be tuned.
➔The note name and the current tuning value of the pressed key
will appear in the display.
XSet the tuning.......................................................................................................
Press the TUNE ▼ or ▲ buttons or use the data dial or [–/+] to tune
the pitch of the selected key. If you set the parameter at the left-most
LCD button to ON, you can play the key being tuned in order to check
the sound during this operation. The normal tuning of ±0 cents for the
selected key can be instantly recalled by simultaneously pressing both
the TUNE ▼ or ▲ buttons.
• Range: –100 cents (– 1 semitone) —
+100 cents (+ 1 semitone)
• Basic Value: 0 (for all keys)
• Backup of last settings: OFF
CRepeat steps 1 and 2....................................................................................
Repeat steps 1 and 2 until all the required keys have been tuned.
......................................................................................................................................................
The completed tuning can be named as a tuning file and saved to
disk. It can also be loaded whenever necessary or deleted if not needed.
Make sure that a proper disk (either containing the micro tuning data
or set up for saving) is inserted in the disk drive before executing these
file operations.