53
53
CVP-98/96/600
Starting/Stopping the Accompaniment Style
Tempo
display
Measure
number
Beat lamp
Break
When the Left Pedal function (page 133) is set to BREAK, you can
use the left pedal to trigger a break (silence) in the accompaniment for
dynamic effect.
Holding down the left pedal creates the break, and playback resumes
from the top of the next measure after the pedal is released.
To cancel the break, press the left pedal again during the break.
Stopping the accompaniment style
To stop style playback, press the [START/STOP] button.
To playback an ending pattern before stopping, press the [ENDING]
button.
Press [ENDING] a second time during playback to produce a
ritardando (gradually slowing) ending.
Different ending patterns are provided for the MAIN A and MAIN B
variations. (The [ENDING] lamp lights during ending playback). The
[MAIN A] lamp also lights when changing from the Main A pattern, and
the [MAIN B] lamp lights when entering from Main B.) The ending
begins from the top of the next measure if the [ENDING] button is
pressed on or after the second beat of a measure.
You can have the accompaniment fade out (gradually decrease in
volume to silence) and automatically stop by pressing the [FADE IN/
OUT] button. Then, it automatically sets to fade in stand-by (the lamp
lights) and stays in this condition for a few seconds before releasing.
[FADE IN/OUT] can be set to on no matter which pattern
([INTRO], [MAIN A], [MAIN B], [ENDING]) is selected.
When the Left Pedal function (page 133) is set to START/STOP, you
can stop the style by using the left pedal.
BEAT
START
/
STOP
TAP SYNCHRO START
/
STOP
AUTO ACCOMPANIMENT
INTRO MAIN A MAIN B ENDING
FADE
IN
/
OUT
AUTO FILL
ACMP ON
VIRTUAL
ARRANGER