16
16
CVP-98/96/600
Basic Operation
Memory Backup
The Backup function (page 147) can be used to maintain various val-
ues and settings, even after the power has been turned off. In the Backup
function display, each parameter group to be backed up can be selected
individually. Values and settings which are not backed up revert to the
basic settings when the power is turned off.
When set to ON, the last setting of these parameters are retained in
memory even after the power is turned off. For a list of the backup pa-
rameters, see page 147.
If the Clavinova is left unused without the power being turned on for
approximately a week, the backed up data is deleted and all the settings
return to the basic settings. For this reason, you should turn on the
power at least once a week and keep it on for a few minutes.
Backup of the Last Settings
• For parameters which can be set to
Backup ON/OFF, the basic setting is
indicated as “Backup of last settings:
ON (or OFF)” in the explanation of
each parameter.
• Items set to Backup ON can be re-
turned to the basic setting anytime by
using the Recall function (page 148).
Display Messages
For ease of operation, the Clavinova shows various messages that
either prompt you to the next operation, ask for confirmation, or inform
you that the last operation is not effective, valid or appropriate. When
such messages appear, follow the instructions as shown. For details
about each message, please refer to the “Messages” section on page 2 in
the Reference Manual.