Yamaha CVP-600 Song Copy (SONG COPY) Display PAGE 5

136
136
CVP-98/96/600
Disk
Song Copy (SONG COPY) Display — PAGE 5
This function allows you to copy song data (data files on disk) re-
corded by the Clavinova to a different song number on the same disk, or
to a different disk.
ZSet up the disk(s).............................................................................................
Insert the disk containing the source song.
➾Press either of the left-most two LCD buttons to select the copy
type. Two copy types are available.
DISK 1 – 1 This function allows you to copy the song to a different song
number on the same disk.
DISK 1 – 2 This function allows you to copy the song to a different disk.
XSelect the source song..............................................................................
Press the SONG ➔ button to highlight the parameter, then use the
data dial or [–/+] buttons to select the source song.
➔The selected song name will appear in the upper section of the
LCD display.
CSelect the destination song number
(DISK1 – 1 only).................................................................................................
This step is only for the DISK1 – 1 copy type. If you have selected
the DISK1 – 2 type copy, go on to step 4.
Press the SONG button to highlight the parameter, then use the data
dial or [–/+] buttons to select the destination song number.
➔If the destination song number already contains data, the name of
the song file will appear in the middle section of the LCD display.
In this case, the original data of the destination song number will
be erased and overwritten by the source song data when execut-
ing the copy operation.
• If the Clavinova’s internal memory
contains song data recorded without a
disk, the CVP mode will be automati-
cally selected for copying the internal
memory data to disk (see page 138),
and the DISK1 – 1 or DISK1 – 2 copy
mode cannot be selected. In this case
if you want to keep the data of internal
memory, copy it to disk first, and delete
the internal memory data by using the
Song Delete function (page 138).
Then, attempt the DISK1 – 1 or
DISK1 – 2 copy operation again.
• When using the Copy function within
the same disk, the operation cannot be
performed if the destination song is set
to the same number as the source
song. In this case, a “Select a different
number!” message appears.