Yamaha CVP-600 Setting the Volume Balance of the Two Voices, Changing the Octave Setting of the Two Voices

38
38
CVP-98/96/600
Playing Two Voices from Different Sides of the Keyboard — Split Mode
Setting the Volume Balance of the Two Voices
ZPress BALANCE from the SPLIT pop-up display...........
➔It is highlighted.
XAdjust the volume balance of the two voices by us-
ing the data dial or [–/+] buttons.....................................................
Pressing BALANCE lets you increase the level of the right voice
only. Equal balance can be instantly reset by simultaneously pressing the
[–/+] buttons.
Volume Balance
• Basic setting: Equal volume
• Backup of last settings: OFF
• The Volume Balance setting globally
affects all voice combinations. Differ-
ent settings cannot be made for each
voice.
The Octave Shift setting lets you adjust the pitch of the two voices up
or down an octave.
Press either LEFT or RIGHT1 of the OCTAVE SHIFT parameter in the
SPLIT pop-up display.
➔The values change each time the LCD button is pressed. Avail-
able settings are –1, 0, and +1.
Changing the Octave Setting of the Two Voices
Octave Shift
• Settings: – 1 (1 octave lower)
0 (no octave shift)
+ 1 (1 octave higher)
• Basic setting: 0 (no octave shift)
• Backup of last settings: OFF
You can also set the Split Point by using the data dial or [–/+] buttons,
after pressing SPLIT POINT in the pop-up SPLIT display. Pressing
SPLIT POINT also advances the value. To reset the value to the basic
setting of F#2, simultaneously press the [–/+] buttons.
• You can use the Damper Range func-
tion (page 134) to set the damper
pedal to affect one or both sides of the
Split. Available settings are:
Only right range
Only left range
Both ranges
• In the basic setting, the damper pedal
affects only the right range.