10 CVP-109/107/105/700
■ To raise the music stand:...........................................................................
ZPull the stand up and toward yourself as far as it will go.
XFlip down the two metal supports at the left and the right on the rear
of the music stand.
CLower the music stand so that it rests on the metal supports.
On the CVP-109/107/105, the illustration shows that the angle of the
music stand can be set in one of three positions, according to the position
of the metal supports. Set the left and right metal supports to the same
position.
■ To lower the music stand:........................................................................
ZPull the music stand toward yourself as far as it will go.
XRaise the two metal supports until they are flat against the rear sur-
face of the stand.
CGently lower the music stand backward until it is all the way down.
CAUTION
• Do not try to use the music stand in a half-raised position. Also, when lowering the
stand, let the stand all the way down before releasing it.
■ To open the key cover:..................................................................................
ZLift the cover slightly (not too much).
XSlide the cover open.
■ To close the key cover:.................................................................................
ZSlide the cover toward you.
XGently lower the cover over the keys.
CAUTION
• Hold the cover with both hands when moving it, and do not release it until it is fully
opened or closed. Be careful to avoid catching fingers (yours or others) between the
cover and main unit.
• Do not place objects on top of the key cover. Small objects placed on the key cover
may fall inside the instrument when the cover is opened, and may be impossible to
remove. This could cause electric shock, short circuit, fire or other serious damage to
the instrument.
Be careful to avoid catching your
fingers when opening or closing
the cover.

Music Stand

Key Cover

Setting Up the Clavinova
CVP-109
CVP-109
CVP-109
CVP-109
8