139
CVP-109/107/105/700
XPause before the punch-in point. ................................................
Press the [PAUSE] button to pause play back a bit before the point
at which you want to start recording. Leave a measure or more before
the punch-in point so you’ll be able to grasp the timing before you
punch in.
CTurn on the Punch-in/out function.............................................
Press the [REC] button.
The PUNCH IN/OUT display appears.
VSelect a track.....................................................................................................
Press the TRACK < or > buttons or use the data dial or [–] and [+]
buttons to select the track.
The selected track is indicated by an underline mark.
Use the rightmost LCD button to set the selected track to RECORD
(recording enabled) or OFF (recording/playback disabled). PLAY can
only be selected for tracks which contain data. When a track is muted,
the track number is “ghosted” (shown in lighter indication) in the dis-
play.
Auto Setting of Punch-in/out
If no other track is selected, the last re-
corded track is automatically selected for
Punch-in/out.
SONG CONTROL
PAUSE REW FF REC
PLAY
/
STOP
SONG CONTROL
PAUSE REW FF REC
PLAY
/
STOP
Song Recording
137
If you select a track that was used to record
an Auto Accompaniment or rhythm part, or
a track (6, 7, or 8) that contains a harmony
part (see sidebar on page 133), you will not
be able to set the track to RECORD.