Yamaha CVP - 105, CVP - 107, CVP - 109, CVP - 700 Making Settings in the INITIAL EDIT Display

171
CVP-109/107/105/700
ZSelect the track to be edited.............................................................
Select the track whose parameters you wish to change by pressing
the TRACK < or > button. If TTL (Total) is selected, any changes will
affect the entire song rather than an individual track.
XSelect the parameters to be changed.....................................
Select the parameters to be changed by pressing the SELECT ▼ or
▲ button.
Making Settings in the INITIAL EDIT Display
CChange the settings...................................................................................
Use the data dial or [–] and [+] buttons to change the settings. You
can instantly check the effect of the changes, since the settings can be
changed during playback.
• If [TTL] is selected and the value of the
reverb depth is changed, the new setting
will also affect the keyboard sound.
• The voices of the tracks to which Auto
Accompaniment, rhythm and/or Harmony
data have been recorded, can also be
changed.
• The data may not be played back accu-
rately if you use the [REW] button while
editing the data.
VWrite the changes. .......................................................................................
When all the Initial Data changes have been made as desired, press
the WRITE button. When the “Are you sure?” message is dis-
played, press the YES button to actually make the specified changes, or
NO to cancel.
When this is completed, the WRITE button will change to UNDO,
allowing you to undo the Write operation and restore the data of the
edited track to what it was before you made any edits.
• All edited data for any number of tracks
within a single song can be written in a
one-time Write operation, by pressing the
WRITE button.
• You can check whether the results of the
Initial Edit operation are what you ex-
pected by starting and stopping playback
with the [PLAY/STOP] button. (You
should try this before you do something
that would make it impossible to select
the UNDO function.)
• The Undo function cannot be used once
you’ve changed the setting, changed a
different setting, or exited from the Initial
Edit mode.
• The Undo feature cannot be used for
data recorded to internal memory (see
page 174).
169
Other Record Edit Functions
The current parameter value for the
selected track.
The parameter to
be changed.
The selected track
is highlighted.
CVP-109/107/700
CVP-109/107/700