Yamaha CVP - 105, CVP - 107, CVP - 109, CVP - 700 - page 160

160 CVP-109/107/105/700
XSelect the event to be moved or copied.
Select the event you want to move or copy as described in steps 5 and
6 of the basic editing procedure (page 148).
➔The selected event is highlighted.
➾If you want to move or copy a series of two or more consecutive
events, press the MARK button (the top right LCD button), then
select the last event in the series as described in steps 5 and 6 of
the basic editing procedure (page 148).
Copying multiple events
• If you decide not to copy a series of
events, simply press the MARK button
so that the MARK function is no longer
highlighted.
• Events that aren’t displayed in the
event list (see page 161) will not be
copied or moved, even if they are
within the selected range.
➔All of the selected events are highlighted.
CCut or copy the selected events.
Press CUT (the second right LCD button) if you intend to move the
selected events to another location, or COPY (the middle right LCD
button) if you want to copy them.
➔If you press CUT, any highlighted events are removed from the
event list. If you press COPY and multiple events were selected in
step 2, they are no longer highlighted.
VSelect the destination location.
Enter the track and location where you want to move or copy the se-
lected data as described in steps 4 and 5 of the basic editing procedure
(page 148). If there is already an event at the desired location, you can
select that event as described in step 6 of that procedure (page 148).
➔The first event that occurs at or after the specified location is high-
lighted.
BPaste the data in the new location.
Pasting multiple copies
• You can repeat steps 4 and 5 to paste
multiple copies of the same data, just
as long as you haven’t cut or copied
other data in the meantime.
• Events that aren’t displayed in the
event list (see page 161) will not be
pasted, even if they were within the
range of events selected for cutting or
copying.
Press the PST button (the fourth right LCD button).
➔Any events that were cut or copied in step 3 are pasted into the
specified location.
158
Step Edit