106 CVP-109/107/105/700
To load a set of 12 style files that was created by selecting ALL as the
memory number when the files were saved in Custom Style mode (see
page 101), press the ALL LOAD LCD button rather than the LOAD
SINGLE button.

XSelect a style file...............................................................................................

• If a tempo is set prior to loading the
style, that tempo becomes the default
for the loaded style.
• Some styles are too large to preview
with the LISTEN function. In this case
the “Too much data for LISTEN func-
tion! Please load data.” message will
be displayed. If this happens, load the
style directly as in step 4.
• The Auto Accompaniment is automati-
cally turned on when the LOAD SIN-
GLE button is pressed, and the style is
played back automatically with the
Auto Accompaniment in C Major when
the LISTEN LCD button is pressed.
You can change the chord or try play-
ing on the keyboard while previewing a
style.
Select the desired style using the left and right LCD buttons, the
STYLE ▲ and ▼ buttons, the data dial, or the [–] and [+] buttons.
You can preview the selected style by pressing the LISTEN LCD
button. (The LISTEN function is not available in the ALL LOAD dis-
play.) To stop listening, press the LISTEN LCD button again, or press
the [START/STOP] button.
• If the selected memory number already
contains a style, the name of that style
will appear above the MEMORY and
LOAD functions in the display. The
existing style will be overwritten when
a new style is loaded. (One pre-pro-
grammed temporary style is automati-
cally loaded into the [DISK/CUSTOM]
memory whenever the power is turned
on.)
Use the MEMORY LCD button to select the memory number to
which the selected style file is to be loaded (1 through 12), then press
the LOAD LCD button to load the style file.
Repeat steps 2 and 3 to select and load other style files.
Using Style Files

CSelect a memory number and load the style.....................

104