222 CVP-109/107/105/700
An error occurred while writing to (as in recording or storing files) or reading from the disk.
➾Try the operation again after pressing the OK button. If the error occurs a second
time, the disk or the disk drive unit may be faulty. If you suspect the drive to be at
fault, refer the problem to your Yamaha dealer.
This message appears when a new or improperly formatted disk has been inserted into
the disk drive. (See page 131.)
➾Press OK if you want to format the disk. Press CANCEL if you want to abort the
formatting process.
This message appears when you attempt to record or perform other file operations using a
disk whose write-protect tab is in the “protect” position.
➾
Set the write-protect tab to the “write-enable” position (page 132), then try the opera-
tion again. If the operation still cannot be performed, the disk itself has internal write
protection, making it impossible to perform recording or file operations on the disk.
This message appears when you attempt to record over parts or perform other operations
on song files that are incompatible or do not allow such operations. Depending on the
song file type, operations such as additional recording, copying, deleting, etc. may not be
possible using the CVP-109/107/105/700.
This appears for a few seconds when a time-consuming operation such as Format, Song
Copy, etc., is finished.
This message is displayed while data is being transferred between the Clavinova and the
disk.
➾The message disappears automatically when the operation is finished.
When operations such as Song Delete or Format are selected, this prompts you to confirm
whether you want to go ahead with the operation or not.
➾Press YES to execute the operation. Press NO to return to the previous display.
The currently loaded disk is full and cannot hold any more data.
➾Press the OK button, then delete any unnecessary data in the disk (page 198), or
use a disk that has more available space. If this message appears during song
recording, recording will stop and any data recorded up to that point will be saved
automatically.
This message appears when you try to create more files than the disk is capable of stor-
ing. You can record up to 60 song files on a 2DD or 2HD disk. A 2DD disk can hold about
107 files (of various types), and a 2HD disk can hold up to about 219 files.
➾Press the OK button, then delete any unnecessary files from the disk (page 198),
or use a disk that has more available space.
A file with the same name already exists.
➾Press the OK button if you wish to overwrite the original file with new data, or press
CANCEL to abort the operation.
This message appears when you try to execute other operations while reading data from
the disk or saving data.
➾Wait until the data read/write operation is completed, then perform the operation
again.
Messages
220
This message appears when you attempt to record over or edit the data of commercially
available software or data recorded on instruments other than the CVP-109/107/105/700/
103 or the CVP-94/92/98/96/600.
➾Press YES to convert the data for recording or editing on the CVP-109/107/105/
700. Press NO if you don't want to convert the data.
It may not be possible to record to tracks other than tracks 1 and 2 of songs con-
verted in this manner.