Yamaha CVP - 105, CVP - 107, CVP - 109, CVP - 700 - page 35

35
CVP-109/107/105/700
●Making Settings in the ORGAN FLUTES [ATTACK] Display
Attack footage volume and LENGTH and RESPONSE settings
Select the appropriate bar in the display by pressing the CURSOR
buttons, then set the volume, LENGTH, or RESPONSE by using the
data dial or [–] and [+] buttons.
Setting the Attack Mode
Press the middle LCD button to change between the EACH and
FIRST settings. When set to EACH, the attack sound is applied to all
played notes.
When set to FIRST, the attack sound is applied only to the first
played note in a legato sequence, and is not applied to subsequent
notes played in legato.
To call up the [FOOTAGE] display, either
press FOOTAGE or press the CURSOR
> button when the cursor is at “4.”
●Image of Attack Length and Response
Volume
Time
Continuous Tone
Greater response time Volume
Time
Decay Tone
Longer attack length
Attack length
Selecting Voices
33