Yamaha CVP - 105, CVP - 107, CVP - 109, CVP - 700 Changing the Reverb Type.....................................................................

49
CVP-109/107/105/700
Use the REVERB TYPE ▲ and ▼ buttons to change the reverb type,
or select the REVERB TYPE function and use the data dial or the [–] and
[+] buttons. (You can also use the left and right LCD buttons to select
one of the reverb types listed in the display.)
➔The selected reverb type is highlighted.
Because the basic setting of the reverb type depends on the accompa-
niment style, the reverb type may change automatically when you select
a different style.
• The reverb type selection affects all
voices played by the keyboard or Auto
Accompaniment. Different settings
cannot be made for each part.
• Depending on the selected voice, the
depth of the effect may sound stronger
or weaker, even though the same
reverb type is selected.
• The reverb effect cannot be applied to
the sounds input through the AUX IN
[R] and [L/L+R] jacks.
• It is also possible to apply reverb ef-
fects to the keyboard voices using the
[EFFECT] button. See the Effect Type
List on page 219 for details.
• If both the [REVERB] button and the
[CHORUS] and/or [EFFECT] buttons
are turned on, all effects will be ap-
plied.
■Setting the Total Depth................................................................................
The overall depth of the selected reverb effect(s) can be set using the
TOTAL DEPTH function in the REVERB display (page 47).
On the CVP-109, the TOTAL DEPTH
setting determines the depth of both the
Natural Reverb and normal reverb ef-
fects.
ZSelect the TOTAL DEPTH function.
➔The TOTAL DEPTH function is highlighted.
TOTAL DEPTH
• Range: 0 (no effect) — 127 (max.)
• Basic setting: 64
Reverb
Reverb Type
• Settings: See table on page 218.
• Basic setting: Depends on style.
■Changing the Reverb Type.....................................................................
You can change the reverb type using the REVERB display (page 47).
CVP-107/700
XSet the total depth of the reverb effect(s).
You can change the setting using the TOTAL DEPTH ▼ and ▲ but-
tons, the data dial, or the [–] and [+] buttons.
To reset the value to the basic setting of 64, simultaneously press
either the TOTAL DEPTH ▼ and ▲ buttons or the [–] and [+] buttons.
• The TOTAL DEPTH setting globally
affects all voices. Different settings
cannot be made for each voice.
• You can also set the reverb depth
separately for the rhythm and accom-
paniment parts, and for each keyboard
part. (See the next operation.)
47