52 CVP-109/107/105/700
If you press the [
<
] button or the [
>
]
button while the CHORUS page is show-
ing, the REVERB DEPTH page or the
EFFECT 1 page (the EFFECT page on
the CVP-105) will be displayed. Refer to
the other sections of this chapter for
details on reverb and other effect set-
tings.

■Changing the Chorus Type....................................................................

You can change the chorus type selection in the CHORUS page. Se-

lect the chorus type using the left and right LCD buttons.

Chorus Type
• Settings: See table on page 219.
• Basic setting: Depends on style.

You can also change the chorus type using the CHORUS TYPE ▲

and ▼ buttons, or by selecting the CHORUS TYPE function and using

the data dial or the [–] and [+] buttons.

➔The selected chorus type is highlighted.

Because the basic setting of the chorus type depends on the accompa-

niment style, the chorus type may change automatically when you select

a different style.

• The chorus type selection affects all
keyboard parts. Different settings
cannot be made for each part.
• Depending on the selected voice, the
depth of the effect may sound stronger
or weaker, even though the same
chorus type is selected.
• It is also possible to apply chorus
effects to the keyboard voices using
the [EFFECT] button. See the Effect
Type List on page 219 for details.
• If both the [CHORUS] button and the
[REVERB] and/or [EFFECT] buttons
are turned on, all effects will be ap-
plied.
ChorusChanging the Chorus Settings

■Displaying the Chorus Settings.....................................................

Press [DIRECT ACCESS], then [CHORUS] to display the CHO-

RUS display page.

DUAL SPLIT REVERB CHORUS EFFECT
EXIT DIRECT ACCESS
➾
➔The LCD displays the CHORUS page.
50
CVP-107/700
CVP-107/700