188 Chapter 17—Digital Audio I/O
D24—Owner’s Manual
Assigning the Coaxial Input & Output
The COAXIAL INPUT and OUTPUT can be assigned to track pairs, all tracks, or
turned off, using the Coaxial I/O function.
The COAXIAL INPUT assignment has priority over the slot inputs. When, for exam-
ple, the COAXIAL INPUT is assigned to tracks 1 and 2, signals arriving at slot inputs 1
and 2 are ignored.
1Press the [SETUP] button.
The SETUP indicator lights up.
2Use the JOG/DATA dial to select “COAXIAL I/O,” and then press the [ENTER]
button.
The current COAXIAL I/O setting appears on the display.
3Use the JOG/DATA dial to select an assignment.
The following assignments are available, the default setting is OFF:
TRK 1/2—The COAXIAL INPUT and OUTPUT are assigned to tracks 1 and 2.
TRK 3/4—The COAXIAL INPUT and OUTPUT are assigned to tracks 3 and 4.
TRK 5/6—The COAXIAL INPUT and OUTPUT are assigned to tracks 5 and 6.
TRK 7/8—The COAXIAL INPUT and OUTPUT are assigned to tracks 7 and 8.
ALL —The COAXIAL INPUT and OUTPUT are assigned to all tracks, with odd-num-
bered tracks being assigned to the left-channel, and even-numbered tracks being
assigned to the right-channel. To prevent the possibility of signal clipping when four
output signals are mixed, each signal is attenuated by 12 dB (this attenuation does not
affect the slot outputs).
OFF—The COAXIAL INPUT and OUTPUT are off.
4Press the [ENTER] button to confirm your selection, or the [CANCEL] button
to cancel the Coaxial I/O function.
5Press the [SETUP] button again to leave setup.
Emphasis & the D24
The D24 has no functions for adding or removing emphasis information. When a dig-
ital audio signal containing emphasis information (15 µs/50 µs) is input, the D24 auto-
matically detects it and records both the audio and emphasis information. During
playback, the digital audio is output with the same emphasis information.
SCMS & the D24
The D24 does not recognize SCMS (Serial Copy Management System) information.
When a digital audio signal containing SCMS information is input, the SCMS informa-
tion is ignored and only the audio is recorded.