Jog/Data & Shuttle/Cursor Controls 15
D24—Owner’s Manual
Jog/Data & Shuttle/Cursor Controls
AJOG ON button & indicator
This button is used to turn on the Nudge and Shuttle functions. The JOG ON indicator
lights up when these functions are on. See “Nudging the Current Position” on page 53
and “Shuttling” on page 52 for more information.
BJOG/DATA dial
This is a dual-function control, the operation of which depends on the [JOG ON] but-
ton. When [JOG ON] is off, the JOG/DATA dial is typically used for time and data entry
and selecting parameters and functions on the display. Time values can be entered on
the 2nd line of the display using the keypad, and then adjusted up or down in sub-frame
steps using the JOG/DATA dial.
When [JOG ON] is on, the JOG/DATA dial is used to nudge the current position while
auditioning a small section of recorded material. See “Nudging the Current Position”
on page 53 for more information.
When the [VARI SPEED], [UTILITY], [SETUP], [V.TRACK SELECT], or [EDIT] but-
ton is pressed, the JOG/DATA dial is used to select functions and set parameter values.
CSHUTTLE/CURSOR ring
This is a dual-function control, the operation of which depends on the [JOG ON] but-
ton. When [JOG ON] is off, the SHUTTLE/CURSOR ring is used to move the cursor
on the display when selecting virtual tracks, titling projects, setting a timecode offset,
or setting the absolute start time for a new project.
When [JOG ON] is on, the SHUTTLE/CURSOR ring is used to shuttle forwards or
backwards at various speeds while auditioning the recorded material. See “Shuttling”
on page 52 for more information.
JOG ON

1

2

3

JOG/DATA SHUTTLE/
CURSOR