Auto Punch In/Out Recording 75
D24—Owner’s Manual
9Use the JOG/DATA dial to select the take that you want to audition, and then
press the [ENTER] button.
The D24 plays the selected take along with the seven other main tracks from the Pre-roll
point through to the Post-roll point. Then it locates the Pre-roll point and waits.
Press the [ENTER] button again to audition the selected take again.
10 Use the JOG/DATA dial and [ENTER] button to select and audition other takes.
11 To leave the Audition function, press the [CANCEL] button.
“AUDITION” appears on the display.
12 Use the JOG/DATA dial to select “REC TAKE nn” for additional take recording,
or “FIX TAKE” to fix a take, and then press the [ENTER] button to activate your
selection.
Fixing Takes
The Fix Take function is used to select the take you want to keep.
When only one take has been recorded, it’s not necessary to use the Fix function, as the
take is fixed automatically when you leave the Auto Punch In/Out function.
In the following example, eight takes have been recorded and take 4 is fixed.
13 Use the JOG/DATA dial to select “FIX TAKE,” and then press the [ENTER] button.
“FIX TAKE—TAKE nn” appears on the display (“nn” being the number of the take).
14 Use the JOG/DATA dial to select the take that you want to fix, and then press
the [ENTER] button.
“TAKE nn—ARE YOU SURE” appears on the display.
15 Press the [ENTER] button to fix the take, or the [CANCEL] button to select
another take.
If you press the [ENTER] button, “FIXED” appears on the display for a few seconds, the
selected take is fixed, the Auto Punch In/Out function is cancelled, and the AUTO
PUNCH indicator goes out.
If you press the [CANCEL] button, repeat step 14 to select another take.
LAST REC IN
point
Press to
fix take 4
Select "FIX TAKE" Select take 4
LAST REC OUT
point
2-1
READY 2
ENTER ENTER
Take 0 (original)
Take 1
Take 2
Take 3
Take 4
Take 5
Take 6
Take 7