Yamaha D24 Setting the Pre-roll Time, Setting the Post-roll Time

76 Chapter 7—Punch In/Out Recording
D24—Owner’s Manual
Setting the Pre-roll Time
The pre-roll time can be set from 1 to 30 seconds, the default being 5 seconds.
1Press the [UTILITY] button.
The UTILITY indicator lights up.
2Use the JOG/DATA dial to select “PRE ROLL,” and then press the [ENTER] but-
ton.
The currently set pre-roll time appears on the display.
3Use the JOG/DATA dial to set the pre-roll time from 1 to 30 seconds.
4Press the [ENTER] button to activate your selection, or the [CANCEL] button
to cancel the Pre Roll function.
5Press the [UTILITY] button again to leave utility.
The UTILITY indicator goes out.
Setting the Post-roll Time
The post-roll time can be set from 1 to 30 seconds, the default being 5 seconds.
1Press the [UTILITY] button.
The UTILITY indicator lights up.
2Use the JOG/DATA dial to select “POST ROLL,” and then press the [ENTER]
button.
The currently set post-roll time appears on the display.
3Use the JOG/DATA dial to set the post-roll time from 1 to 30 seconds.
4Press the [ENTER] button to activate your selection, or the [CANCEL] button
to cancel the Post Roll function.
5Press the [UTILITY] button again to leave utility.
The UTILITY indicator goes out.
LAST REC IN
point
Pre-roll
point
Pre-roll
time
LAST REC OUT
point Post-roll point
Post-roll
time