82 Chapter 8—Editing Projects
D24—Owner’s Manual
Protecting Projects
The Project Protect function can be used to protect projects against accidental editing.
When a project is protected, it cannot be edited using the Project, Track, or Part edit
functions, although it can still be copied.
1Select the project that you want to protect.
2Press the [EDIT] button.
The EDIT indicator lights up.
3Use the JOG/DATA dial to select “PROJECT EDIT,” and then press the [ENTER]
button.
4Use the JOG/DATA dial to select “PROTECT,” and then press the [ENTER] but-
ton.
“PROTECT—PROTECT OFF” appears on the display.
5Use the JOG/DATA dial to select either “OFF” or “ON.”
The default setting is OFF.
6Press the [ENTER] button.
“PROJ PROT—ARE YOU SURE” appears on the display.
7Press the [ENTER] button to confirm your selection, or the [CANCEL] button
to cancel.
When OFF is selected, “UNPROTECTED” appears on the display, and when ON is
selected, “PROTECTED” appears.
8Press the [EDIT] button to leave edit.
The EDIT indicator goes out.