Inserting & Ejecting Disks 25
D24—Owner’s Manual
Inserting & Ejecting Disks
This section explains how to insert and eject MO disks.
1Insert the MO disk into the disk drive with the shutter facing forward and the
labeled side facing up, as shown below. Push it in until it clicks into place.
The disk should slide easily into the disk drive. If it doesn’t, make sure that you’ve
inserted it the right way around.
When a disk is inserted, “DISK LOADED” appears on the display.
If the disk has already been used for recording in the D24, the number and title of the
first project appear on the display. If the disk has been formatted for use with the D24
but not yet used for recording, “01 NO TITLE” is displayed.
2To eject a disk, press the eject button, as shown below.
The eject button also functions as a drive activity indicator, lighting up when the disk
drive is busy.
The eject button does not operate during recording and should not be pressed simul-
taneously with another button, as this may cause a malfunction.
PROJECT SEARCH
RTN TO
ZERO
REWFFSTOPPLAYREC
ROLL
BACK
LAST REC
SET
REPEATREHE
BA
B
A
AUTO
PUNCH
IN OUT
PROJECT SEARCH
RTN TO
ZERO
REWFFSTOPPLAYREC
ROLL
BACK
LAST REC
SET
REPEATREHE
BA
B
A
AUTO
PUNCH
IN OUT