Yamaha D24 Storing Locate Points Automatically

Storing Locate Points Automatically 65
D24—Owner’s Manual
Storing Locate Points Automatically
Locate points can easily be stored on-the-fly by using the Auto Memory Store function,
which automatically selects the next locate memory as each locate point is stored.
1Press the [LOC MEM STORE] button.
The LOC MEM STORE indicator lights up, “STORE MEM nn” (the flashing “nn” being
the memory number), and the value already stored in the locate memory appear on the
display. If no value has been stored in the memory, “--:--:--.--.-” is displayed.
2Use the JOG/DATA dial or keypad to select a locate memory from 1 to 99.
3While holding down the [SET] button, press the [ENTER] button.
The current position is stored to the selected locate memory and the next locate mem-
ory is selected automatically.
4Repeat step 3 to store further locate points.
Locate points can be stored while the D24 is stopped or during rewind, fast forward,
playback, recording, or rehearsal.
5Press the [LOC MEM STORE] button to leave the Locate Memory Store func-
tion.
The LOC MEM STORE indicator goes out.
In the following example, the positions 00:01:00.00.0, 00:02:00.00.0, and 00:03:00.00.0
are stored to locate memories 01, 02, and 03 respectively during playback.
00:00:00.00.0 00:01:00.00.0
LOC MEM: 01 LOC MEM: 02 LOC MEM: 03
LOC MEM
STORE LOC MEM STORE
SET
00:02:00.00.0 00:03:00.00.0
ENTER SET ENTER SET ENTER
Playback