Yamaha D24 00 03 27 00

66 Chapter 6—Quick Locate
D24—Owner’s Manual
Recalling Locate Points
Stored locate points can be recalled using the Locate Memory Recall function.
1Press the [LOC MEM RECALL] button.
The LOC MEM RECALL indicator lights up, “RECALL MEM nn” (the flashing “nn”
being the memory number), and the value stored in the locate memory appear on the
display. If no value has been stored in the memory, “--:--:--.--.-” is displayed.
2Use the keypad or JOG/DATA dial to select a locate memory from 1 to 99.
To enter number 37, for example, press [3] and then [7].
To cancel your selection and select another locate memory, press the [CANCEL] but-
ton, and then reenter the locate memory number.
3Press the [ENTER] button to fix the selected memory number.
The memory number “nn” stops flashing.
Alternatively, press the [LOCATE] button to locate the selected point straightaway.
4Press the [LOCATE] button to locate the recalled position.
The specified position is located and the position appears on the main counter, as
shown below.
5Press the [LOC MEM RECALL] button to leave the Locate Memory Recall func-
tion.
The LOC MEM RECALL indicator goes out.
Locate points are recalled with sub-frame accuracy.
In the following example, locate memory number 5 is recalled and located.
HMSF
rec al l mem01
000327 000
00 00 00 00
HMSF
rec al l mem01
000327 000
00 03 27 00
00:00:00.00 00:01:00.00
LOC MEM
RECALL LOCATE
5LOC MEM
RECALL
Current
position
ENTER