70 Chapter 7—Punch In/Out Recording
D24—Owner’s Manual
Manual Punch In/Out Recording
This section explains how to perform manual punch in/out recording for real. With the
Auto Input monitoring function turned on, playback and input monitor switching is
performed automatically at the LAST REC IN and OUT points. See “Monitoring” on
page 42 for more information.
The following illustration shows the procedure for manual punch-in/out recording.
1Use the [RECORD READY] buttons to select tracks for recording.
The corresponding READY indicators flash.
2Press the [PLAY] button to start playback.
Playback starts and the PLAY button indicator lights up.
3Press the [REC] and [PLAY] buttons simultaneously to punch in.
Recording starts, “RECORDING” appears on the display, and the REC button indicator
and READY indicators light up continuously. The LAST REC IN point is set automat-
ically and its indicator lights up.
4Press the [PLAY] button to punch out.
The D24 stops recording and continues with normal playback.
The REC button indicator goes out and the READY indicators flash. The LAST REC
OUT point is set automatically and its indicator lights up.
The transport buttons are inactive for about one second following a punch out, due to
internal processing by the D24.
5Press the [STOP] button to stop playback.
The PLAY button indicator goes out.
To play back what you’ve just recorded, press the LAST REC [IN] button to locate the
point at which recording started, and then press the [PLAY] button to start playback.
LAST REC IN
point
Record PlayPlay
LAST REC OUT
point
1
2
3
4
5
6
7
8
1-1
2-1
3-1
4-1
5-1
6-1
7-1
8-1
READY 2
STOPPLAYPLAY PLAY
REC
2
RECORD
READY