58 Chapter 6—Quick Locate
D24—Owner’s Manual
Searching for Projects
Projects can be selected using the PROJECT SEARCH buttons.
1Press the [ ] PROJECT SEARCH button to locate the top of the current
project. Press the button again to locate the top of the previous project.
2Press the [ ] PROJECT SEARCH button to locate the top of the next project.
If the [ ] PROJECT SEARCH button is pressed while the last recorded project is
selected, “nn NEW PROJ” appears on the display. See “Recording” on page 33 for more
information.
Project Search Confirmation
The Project Search Confirmation function is used to prevent accidental project selec-
tion with the PROJECT SEARCH buttons. When set to ON, the message “ARE YOU
SURE” appears when a different project is selected by using the PROJECT SEARCH
buttons, and you must press the [ENTER] button to confirm your selection.
Project search confirmation is turned on or off using the P SERCH CNFM function.
1Press the [UTILITY] button.
The UTILITY indicator lights up.
2Use the JOG/DATA dial to select “P SERCH CNFM,” and then press the [ENTER]
button.
The current setting appears on the display.
3Use the JOG/DATA dial to select either “OFF” or “ON.”
The default setting is OFF.
4Press the [ENTER] button to activate your selection, or the [CANCEL] button
to cancel the P SERCH CNFM function.
5Press the [UTILITY] button again to leave utility.
The UTILITY indicator goes out.
01 PROJECT 02 PROJECT 03 PROJECT 04 PROJECT
Current
position
01 PROJECT 02 PROJECT 03 PROJECT 04 PROJECT
Current
position