1POWER Switch

Turns this unit on and off.

2Standby Indicator (Europe, U.K. and Australia models only) While the power of this unit is on, pressing the POWER key on the remote control unit switches this unit to the standby mode. In this mode, the standby indicator is half illuminated.

3Remote Control Sensor

Signals from the remote control unit are received here.

4Display Panel

Shows program names, parameters and information for various setting changes and adjustments.

5 AC-3 Indicator

Lights up while the built-in Dolby Surround AC-3 Decoder is functioning.

6 PRO LOGIC Indicator

Lights up while the built-in Dolby Pro Logic Surround Decoder is functioning.

7DSP Indicator

Lights up while the built-in Digital Sound Field Processor is functioning.

8DIGITAL SOURCE AC-3/PCM Indicator

“AC-3” lights up when a Dolby Surround AC-3 encoded signal is input to this unit. “PCM” lights up when a digital signal other than Dolby Surround AC-3 encoded signals is input to this unit.

9TAPE 2 MONITOR Switch

Used when you have connected a second tape deck to this unit’s AUDIO SIGNAL TAPE 2 jacks to select that tape as the source.

0Control Door

See page 4 for how to open and close the control door.

APHONES Jack

Plug in headphones here for private listening. Sound signals from the main channels only are output here. However, if the Dolby Surround AC-3 is decoded, signals at all channels are distributed to the main channels and output here.

BAuxiliary Input Jacks (VIDEO AUX)

Connect an auxiliary video or audio unit such as a camcorder to these jacks. If the connected video unit has a S video output terminal, connect it to the S VIDEO jack to obtain a high resolution picture. The unit connected to these jacks can be selected by the INPUT SELECTOR and REC OUT selector.

CBASS EXTENSION Switch

When pressed inward (ON), boosts bass frequency response at the main left and right channels while maintaining overall tonal balance. If you do not have a subwoofer, the use of this switch will be effective to reinforce the bass frequencies.

*The use of this switch will not be so effective if you set the function “1. SPEAKER SET” in the SET MENU mode to

output low bass signals at the main channels from the subwoofer only. (See pages 30–32 for details.)

DINPUT TRIM Control

Adjusts the input level of each source respectively. Moreover, performs setting changes and adjustments for functions selected in the SET MENU mode.

ESET MENU Switch

Whenever pressed, selects functions in the SET MENU mode.

14