RECORDING A SOURCE TO AUDIO/VIDEO TAPE (OR DUBBING FROM A TAPE TO ANOTHER)
1. Set the REC OUT selector to the SOURCE position.
Front panel
REC OUT
SOURCE TAPE 1
LD 
CD
VCR 1 TV/DBS
VCR 2
VCR 3/DVD
VIDEO AUX
2. Select the source you want to record.
Front panel |
| Remote control | |
INPUT SELECTOR |
|
| |
| LD |
| CD |
TV/DBS | TAPE 1 | or | |
VCR 1 |
| TUNER | |
|
| ||
VCR 2 |
| CD |
|
VCR 3/DVD | PHONO |
4.Set the tape deck or VCR used for recording to the recording mode.
48
Regardless of the setting of the INPUT SELECTOR, when you set the REC OUT selector to CD, the audio signal from your CD player can be recorded by your first tape deck. Likewise, when the REC OUT selector is set to LD, TV/DBS, VCR 2, VCR 3/DVD or VIDEO AUX, both the audio and video signals of the selected source can be recorded by your first VCR.
While recording a source by setting the REC OUT selector to the position other than SOURCE as described above, the following operations can be made at the same time.
●You can monitor the audio (or the audio and video) signals being recorded by selecting TAPE 1 (or VCR 1) on the INPUT SELECTOR.
●You can watch or listen to any other source by selecting it with the
INPUT SELECTOR.
●You can use any other VCR or tape deck not selected by the REC OUT selector to record an audio and video source selected by the
INPUT SELECTOR.
The audio and video signals from VCR 2 (or VCR 3) are sent to VCR 1 when the REC OUT selector is set to VCR 2 (or VCR 3).
If the REC OUT selector is set to VCR 2 (or VCR 3), you can not dub from your first VCR to the second VCR (or the third VCR), even if VCR 1 is selected by the INPUT SELECTOR.
To dub the audio from your second tape deck to the first one, depress the TAPE 2 MONITOR switch (and set the INPUT SELECTOR to any source other than TAPE 1 before beginning to record).