INPUT LEVEL ADJUSTMENT

This adjustment is important for obtaining the best performance from the internal circuits of this unit. The optimum input level of this unit is pre-adjusted on the basis of the CD source level. This adjustment should be performed on all input sources in your system respectively, so that their levels match the CD source level as closely as possible.

1. Select the CD source.

Front panel

 

Remote control

INPUT SELECTOR

 

 

 

 

 

CD

 

LD

 

 

TV/DBS

TAPE 1

or

VCR 1

 

TUNER

VCR 2

 

CD

 

VCR 3/DVD

PHONO

VIDEO AUX

 

2.Play the source.

3.Increase the setting of the master VOLUME control to a convenient listening level (you will use this as your “reference” level).

Front panel

Remote control

VOLUME

 

 

or

4. Select any other source in your system (VCR, tuner, etc.) and

English

 

play that source.

 

 

 

 

Front panel

 

Remote control

 

INPUT SELECTOR

 

 

 

TV/DBS

LD

 

TUNER

 

TAPE 1

or

 

VCR 1

 

TUNER

 

VCR 2

 

CD

 

 

VCR 3/DVD

 

PHONO

 

 

 

 

 

 

VIDEO AUX

5.Adjust the level of the source to be approximately equal to your CD player’s “reference” level by using the INPUT TRIM control.

Front panel

INPUT TRIM SET MENU

*This adjustment can also be done with the remote control unit.

For using the remote control unit, refer to “11. INPUT TRIM (Input level adjustment)” on page 44.

6. In the same way, adjust levels of other sources.

NOTES

•The adjustments will be saved until it is readjusted.

•When the Dolby Surround AC-3 is decoded, your adjustment will become ineffective, and the preset input level is restored.

35