Yamaha DSP-A3090 METHOD OF CHANGING SELECTIONS

Remote control

METHOD OF CHANGING SELECTIONS

The use of the remote control unit is recommended for simple operation. Operations should be made watching information on this unit’s display panel or the monitor screen.

1.Turn the power of this unit on. (If you want to display information on the monitor, turn the power of the monitor on.)

Front panel	Remote control
POWER	POWER
	or

2.Set the PARAMETER/SET MENU switch to the SET MENU position on the remote control unit.

Remote control

PARAMETER

SET MENU

3. Press ▼ once so that “1. SPEAKER SET” lights up on the display.

Remote control

4.Press “+” or “–” once.

Remote control

5.Press ▼ (or ▲) once or more until the title of function on which you will change the selection appears on the display.

Remote control

6.Press “+” or “–” once or more so that the arrow points the

position you will select.

7.Repeat step 5 and 6 to change selections on other functions in the same way.

NOTE: The same operations can also be made on the front panel. First press the SET MENU switch and then INPUT TRIM control. Select the title of function by pressing the SET MENU switch, and change the choice by pressing the INPUT TRIM control.

32