8FRONT LEVEL +/– Keys

Increase (+) or decrease (–) the volume level of the front effect speakers.

9CENTER LEVEL +/– Keys

Increase (+) or decrease (–) the volume level of the center speaker(s).

0REAR LEVEL +/– Keys

Increase (+) or decrease (–) the volume level of the rear effect speakers. Pressing these keys change both of the right and left effect speaker’s levels at the same time with the level balance between them unchanged. To change the level balance between the right and left effect speakers, follow the instruction on page 33.

ARESET Button

Press this button to “reset” the internal microcomputer which controls remote control operations. Microcomputer “reset” is necessary when the remote control freezes. If you have exchanged batteries in the remote control unit with new ones, press the RESET button before using the remote control unit.

*Pressing the RESET button will not erase learned functions.

BON SCREEN Display Key

Changes the type of display showing the program name and parameters, or information for various setting changes and adjustments on the connected monitor’s screen.

Whenever pressed, the screen changes to a full display, a simple display and no display in turn.

CCLEAR Button

Used in USER or LEARN mode to erase a learned function. (See page 65.)

DEFFECT ON/OFF Key

Normally ON, this key can be turned OFF to disable output from the center and effect speakers so that the sound becomes normal 2-channel stereo.

EParameter Select Keys

Select DSP program parameters, or titles of the functions in the SET MENU mode.

FMUTING Key

Decreases the master volume level by 20 dB. While muting, the indicator on the master VOLUME control flashes on and off continuously.

GParameter +/– Keys

Edit DSP program parameters or used for setting changes and adjustments in the SET MENU mode.

HMASTER VOLUME +/– Keys

Increase (+) or decrease (–) the master volume level.

IPARAMETER/SET MENU Switch

When set to the PARAMETER position, the Parameter Select Keys and Parameter +/– Keys will select and edit DSP program parameters. When set to the SET MENU position, the Parameter Select Keys and Parameter +/– Keys are used for setting changes and adjustments in the SET MENU mode.

JProgram Select Keys (1 through 12) Select DSP programs 1 through 12.

KTuner Function Keys

Operate Yamaha tuner functions.

LTape Deck Function Keys

Operate Yamaha tape deck functions.

M1/2 Switch

When the YPC/USER/LEARN Switch is set to YPC, this switches the CD/LD Function Keys to keys for use with either the CD player or LD player. (“1” for the CD player and “2” for the LD player.) When the YPC/USER/LEARN Switch is set to USER or LEARN, this switch selects the group 1 or 2 of the learnable function keys. (See page 64.)

English

17