NOTE: The originally preset function of a key is still available in the USER position if the key does not learn a new function.

NOTE: If there is no more room in the memory area for a function to be learned, the TRANSMIT/LEARN indicator will flash on and off eight times. In this case, even if some keys are not occupied with functions from other remote control units, no further learning is possible.

The function learned by any key can be easily changed by repeating the learning process with a different function. It is also possible to erase learned functions so that the keys return to the originally preset functions.

Erasing a Learned Function

1.Set the YPC/USER/LEARN switch to “USER”.

2.Use the point of a pencil or other similar object to press and hold the CLEAR button.

3.Press and hold the key whose function is to be erased until the TRANSMIT/LEARN indicator flashes on and off three times.

Erasing All Learned Functions

1.Set the YPC/USER/LEARN switch to “LEARN”.

2.Use the point of a pencil or other similar object to press and hold the CLEAR button.

3.Press and hold any key until the TRANSMIT/LEARN indicator flashes on and off seven times.

NOTE: All of the memorized functions will be retained while you replace the batteries. However, if no batteries are installed for a few hours, the memory will be erased and will have to be programmed again.

NOTE: There may occasionally be instances in which, due to the signal-coding and modulation systems employed by another remote control unit, that this remote control unit will not be able to learn its signals. In this case, the TRANSMIT/LEARN indicator will flash on and off eight times.

NOTE: When the remote control freezes, press the RESET button to “reset” the internal microcomputer which controls remote control operations.

Pressing the RESET button will not erase learned functions.

English

65