Manuals / Brands / Home Audio / Stereo System / Yamaha / Home Audio / Stereo System

Yamaha DSP-A3090 Notes about the Remote Control Unit, Open/close the control door, Remote control transmitter operation range

1 74

Download 74 pages, 690.04 Kb

Notes about the Remote Control Unit

Open/close the control door

●When you notice that remote control operation has become erratic, or the distance from which the remote control will function has decreased, it’s time to replace the batteries. Always replace all batteries at the same time.

*If you have exchanged batteries in the remote control unit with new ones, press the RESET button before using the remote control unit.

●Make sure that the YPC/USER/LEARN switch on the remote control unit is set to the YPC or USER position for normal operation.

●This remote control uses an advanced, highly directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit when operating.

When it is not necessary to operate controls inside the control door, close the door.

To open the door

Remote control transmitter operation range

To close the door

Remote control sensor

Within approximately 6 m (19.7 feet)

30°

30°

Notes

●There should be no large obstacles between the remote control transmitter and the main unit.

●If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the

remote control transmitter to work incorrectly. In this case, reposition the

4	main unit to avoid direct lighting.

Contents

Page PRECAUTIONS & SAFETY INSTRUCTIONS Page PRECAUTIONS We Want You Listening For A Lifetime English CONTENTS GETTING STARTED Unpacking Installing the Remote Control Unit Batteries Notes about the Remote Control Unit FEATURES Digital Sound Field Processing Dolby Pro Logic Surround Dolby Surround AC-3 Dolby Surround + DSP (CINEMA DSP) Dolby Pro Logic + 2 Digital Sound Fields Dolby Surround AC-3+ 3 Digital Sound Fields Video superimpose SPEAKER SETUP Setting Up Your Speaker System Use of the Center Dialog Speaker Is Recommended Use of a Subwoofer Expands Your Sound Field Four Possible Types of Speaker System Configurations Recommended 4 Speaker System 5 Speaker System 6 Speaker System 7 Speaker System Speakers and Speaker Placement CONTROLS & THEIR FUNCTIONS FRONT PANEL (Europe Model) Page Page REMOTE CONTROL UNIT Page CONNECTIONS REAR PANEL PARTS AND THEIR FUNCTIONS (General Model) Page NOTE REAR PANEL SWITCH AND CONTROL SETTINGS GENERAL INSTRUCTIONS FOR CONNECTIONS CONNECTING AUDIO/VIDEO SOURCE EQUIPMENT TO THIS UNIT BASIC CONNECTIONS CONNECTING TO DIGITAL (OPTICAL AND COAXIAL) JACKS CONNECTING TO AC-3RF OUTPUT OF THE LD PLAYER CONNECTING TO S VIDEO JACKS CONNECTING SPEAKER SYSTEMS CONNECTING THE MAIN SPEAKERS TO THIS UNIT CONNECTING THE EFFECT SPEAKERS AND THE CENTER SPEAKER(S) TO THIS UNIT ADDING A SUBWOOFER SELECTING THE OUTPUT MODES SUITABLE FOR YOUR SPEAKER SYSTEM 1C. MAIN SPEAKERS Preset position: LARGE 1D. LFE/BASS OUT Choices: MAIN/SW/BOTH Preset position: SW METHOD OF CHANGING SELECTIONS ADJUSTMENTS BEFORE OPERATION MAIN/CENTER/EFFECT SPEAKER LEVEL BALANCE ADJUSTMENT Page INPUT LEVEL ADJUSTMENT ADJUSTMENTS IN THE “SET MENU” MODE DESCRIPTIONS OF THE FUNCTIONS 1.SPEAKER SET (Selecting the output modes suitable for your speaker system) 2.LOW FREQ. TEST (Adjusting subwoofer level by using the test-tone) Operating procedure Adjust subwoofer level with the control on the subwoofer Control range: MUTE, –20dB to 0 dB (in 1 dB step) Preset value: 0 dB 4.CENTER DELAY (Adjusting the delay of center sounds (dialog etc.)) Control range: 0 ms to 5 ms (in 1 ms step) Preset value: 0 ms 6. CINEMA EQ (Adjusting the tonal balance of speakers) L, C, R FRONT EFCT REAR EFCT 6A. L,C,R EQ mPreset value of the CINEMA Equalizer L, C, R EQ FRONT, REAR EFCT EQ mFrequency characteristics Choices: MAX/STD/MIN Preset position: MAX STD (Standard): nH-LEVELCUT (High Level Cut Scale) Control range: 0.0 to 1.0 (in 0.2 step) Preset value: nL-LEVELBST (Low Level Boost Scale) 9.MEMORY GUARD (Locking DSP parameters and other adjustments) 11. INPUT TRIM (Input level adjustment) AUTO: LAST: Operating method 13. DIMMER (Changing brightness of the display panel) GENERAL OPERATION PLAYING A SOURCE Switching the input mode For CD, TAPE 1, TV/DBS and VCR3/DVD sources: AC-3 PCM ANALOG Notes on input mode selection for LD sources RECORDING A SOURCE TO AUDIO/VIDEO TAPE (OR DUBBING FROM A TAPE TO ANOTHER) SELECTING SOUND FIELD PROGRAMS Page MUTING THE EFFECT SOUND SUPERIMPOSED VIDEO PROGRAM/PARAMETER DISPLAY DESCRIPTIONS OF THE SOUND FIELD PROGRAMS Page Page Page Page Page CREATING YOUR OWN SOUND FIELDS SELECTING AND EDITING PROGRAM PARAMETERS WHAT IS A SOUND FIELD THE ELEMENTS OF A SOUND FIELD Page DESCRIPTIONS OF THE DIGITAL SOUND FIELD PARAMETERS ●LIVENESS ● REV. TIME (Reverberation Time) ●REV. DELAY (Reverberation Delay) ●REV. LEVEL (Reverberation Level) ●EFCT TRIM (Effect Trim) ●P. INIT. DLY (Presence Initial Delay) ●P. ROOM SIZE (Presence Room Size) ●S. INIT. DLY (Surround Initial Delay) ● S. DELAY (Surround Delay) ●S. ROOM SIZE (Surround Room Size) REMOTE CONTROL LEARNING FUNCTION Erasing a Learned Function Erasing All Learned Functions TROUBLESHOOTING Page SPECIFICATIONS