Yamaha DVD-S1800 dimensions 33 En, Setting speaker levels, Setting the SA-CD configuration

Initialize

You can reset [Distance] settings to the initial factory settings.

1Select [Initialize] under [Distance] in [SPEAKER] menu.

2Press .

➜The confirmation screen appears.

3Select [Yes] to reset the setting, and then press

ENTER.

➜[Distance] settings are reset to the initial factory settings.

Setting speaker levels

You can set the volume levels for individual speakers.

•Select [Level] in [SPEAKER] menu.

Front L, Center, Front R, Surround L, Surround R, Subwoofer

Set the volume levels for front L/R speakers, center speaker, surround L/R speakers or subwoofer.

Control range: 0dB to –12dB

Control step: 1dB

Test Tone

A test tone can be output to help you judge the volume level of each speaker.

1Select [Test Tone] under [Level] in [SPEAKER] menu.

2Press / to select [Off], [Manual] or [Auto].

Off

Select this to output no test tone.

Manual

Select this to output the test tone manually.

Auto

Select this to output the test tone from each speaker automatically.

3For [Auto], press / to select [Yes], and then press ENTER to output the test tone. For

[Manual], press / to select each speaker, and then press ENTER to output the test tone.

Notes

•The test tone is not output from a center speaker, surround speakers, and a subwoofer when the [Analog Output] setting is set to [Stereo] (see “Setting the analog output” on page 31).

•These settings are only effective for analog output.

SETUP MENU

Initialize

You can reset [Level] settings to the initial factory settings.

1Select [Initialize] under [Level] in [SPEAKER] menu.

2Press .

➜The confirmation screen appears.

3Select [Yes] to reset the setting, and then press

ENTER.

➜[Level] settings are reset to the initial factory settings.

Setting the SA-CD configuration

You can select speaker sizes and on/off statuses for SA-CD discs. You can also select a cut-off (cross-over) frequency for all low-frequency signals. All frequencies below the selected frequency are sent to the subwoofer.

•Select [SA-CD] in [SPEAKER] menu.

SA-CD Config

Select speaker sizes and on/off statuses from the following three settings.

Speaker		Size or on/off
	Config 1	Config 2	Config 3
Front L/R	Large	Small	Large
Center	Large	Small	Small
Surround L/R	Large	Small	Small
Subwoofer	On	On	Off

CUT-OFF Frequency

Select a cut-off (cross-over) frequency for all low- frequency signals. All frequencies below the selected frequency are sent to the subwoofer.

Control range: 60, 80, 100, 120 (Hz)

English

33 En