TURNING THE POWER ON/OFF TO THIS SYSTEM

(See figure 0 on page 6.)

If the AC supply lead is connected to the AC outlet, this system can be turned ON and OFF (STANDBY mode) by pressing the POWER switch on the front panel of TCD-GX3 or the POWER switch on the remote control transmitter.

STANDBY mode

While the power is on, pressing the POWER switch (or the POWER switch on the remote control transmitter) switches the system to the STANDBY mode. (In this mode, the display shows only the time and the STANDBY indicator on the front panel is illuminated.) In this mode, main voltage is still present inside the system. If you want to switch off the system completely, disconnect the AC power plug from the AC outlet.

SETTING THE CLOCK

1

AM

TUNINGMEMORY

HOUR

MIN

TIME ADJ

Changes.

2

AM

TUNINGMEMORY

HOUR

MIN

TIME ADJ

Changes.

Before setting the clock, if the built-in tuner is selected as the input source, press the DISPLAY button to change the station frequency display to the time display, and proceed to the next steps immediately before the station frequency display is restored.

1 While pressing the TIME ADJ button, press the HOUR button and set the hour.

*Press the HOUR button once to advance the time by 1 hour. Press and hold to advance continuously.

2 While pressing the TIME ADJ button, press the MIN button and set the minute.

*Press the MIN button once to advance the time by 1 minute. Press and hold to advance continuously.

*The hour setting will not advance even if minute is advanced from “59” to “00”.

In the event of a power failure or when the AC supply lead is disconnected.

The time display will go out and the time which you had set will be cleared. So set the time again if the AC power supply is resumed.

VOLUME CONTROL

Front panel operation

Rotate the VOLUME control clockwise to increase the volume, and counterclockwise to decrease the volume.

VOLUME

Remote control operation

Press the “ ” side of the VOLUME button to increase the volume and the “ ” side to decrease the volume.

* The current volume level can be seen at a glance on the display.

VOLUME

MINMAX

E-8