TUNING OPERATION

2

1

4, 3

3, 2

1

POWER CD TUNER TAPE

1

2

3

FM/AM

2

1

2

3

 

 

4

5

6

 

 

4

5

6

 

 

7

8

9

DISPLAY

 

7

8

9

 

 

0

 

+10

SLEEP

 

0CD/TUNER

PLAY/PAUSEAUX

STOP TIME REPEAT

PROG TAPE EDIT RANDOM

MUSIC

LOCATION

USER

TAPE

DECK

B

A

REC/

PAUSE

VOLUME

Normally, if station signals are strong and there is no interference, quick automatic-search tuning (Automatic tuning) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (Manual tuning).

Automatic tuning

1 Press the TUNER input selector button.

2 Select the reception band (FM or AM) by pressing the FM/AM button while watching the display.

3 Press the AUTO/MAN’L button so that “AUTO” appears on the display.(In this mode, stations are received in stereo or monaural automatically.)4 Press the TUNING button to tune to a higherfrequency, or press the TUNING button to tune to a lower frequency.(When tuned to a station, “TUNED” will light up on the display.)

5 If the station where tuning search stopped is not the desired one, follow step 4 again.

*If the tuning search does not stop at the desired station, change to the Manual tuning method as described below.

*STEREO indicator will light up when an FM stereo broadcast with sufficient signal strength is received.

Manual tuning

1 Follow steps 1 and 2 of the Automatic tuning method.2 Press the AUTO/MAN’L button so that “AUTO” disappears from the display.(In this mode, stations are received in monaural.)

3 Press and hold the TUNING button to tune to a higher frequency, or press and hold the TUNING button to tune to a lower frequency.

Release it just before reaching the desired frequency, and then press it repeatedly until the desired frequency appears.

(When tuned to a station, “TUNED” will light up on the display.)

Note

If you tune to an FM station manually, it is received in monaural automatically to increase the signal quality.

English

E-15