TAPE DECK OPERATION
1
5 4
Tape A or tape B playback
1
2 Open the DECK A or DECK B cassette compartment by pressing the EJECT button.3 Load the tape into the DECK A or DECK B cassette compartment, and close the lid panel completely by pressing the panel until it clicks.
4 Press the DOLBY B NR button so that the indicator over the button lights up, if the tape has been recorded with Dolby noise reduction.
*To cancel using the Dolby noise reduction, press the DOLBY B NR button again so that the indicator over the button goes out.
*For details on the Dolby noise reduction, refer to the “Dolby NR (Noise Reduction) system” on page 20.
5 If necessary, switch the reverse mode to the desired one by pressing the reverse MODE selector button so that the corresponding indicator lights up.
The reverse MODE selector button can be operated before or during playback, and changes tape playback as follows:
2 | 6 | 7 | 2 |
3
(Continuous) Starts from side B. (Side A is not played at the first time.)
POWER | CD | TUNER | TAPE | 1 |
1 | 2 | 3 | FM/AM | |
1 | 2 | 3 |
|
|
4 | 5 | 6 |
|
|
4 | 5 | 6 |
|
|
7 | 8 | 9 | DISPLAY |
|
7 | 8 | 9 |
|
|
0 |
| +10 | SLEEP |
|
0 | CD/TUNER |
|
|
|
PLAY/PAUSE |
|
| AUX |
|
STOP | TIME | REPEAT |
|
|
PROG | TAPE | EDIT | RANDOM |
|
| MUSIC |
|
| LOCATION |
|
6 | USER |
|
A | B | |
|
| TAPE |
| DECK | |
REC/ | 7 |
PAUSE | |
| |
| VOLUME |
6 Select the DECK A or B in which the tape you want to play back is loaded by pressing the DECK A/B button so that the corresponding indicator lights up.
7 Press the play
button to listen to side A, or theplay 
button for side B.To stop playback
Press the stop 
button.
Notes
•Switching the tape by pressing the DECK A/B button will not stop the running (or fast running) of the tape to which the selection has been canceled.
Before switching the tape, be sure to stop the running of the currently selected tape.
•When removing the tape, stop the tape if it is running, and then open the cassette compartment.
Direct operation
Even if an input source other than tape deck is selected, pressing the play button (or the fast wind button) will start playback (or fast winding) directly.