TUNING OPERATION
1, 1 | 4 | 3, 5 |
| POWER | CD | TUNER | TAPE |
|
| 1 | 2 | 3 | FM/AM | 1, 1 |
| 4 | 5 | 6 |
| |
4, 2 | 1 | 2 | 3 |
|
|
7 | 8 | 9 |
|
| |
| 4 | 5 | 6 |
|
|
| 7 | 8 | 9 | DISPLAY |
|
| 0 |
| +10 | SLEEP |
|
0CD/TUNER
PLAY/PAUSEAUX
STOP TIME REPEAT
PROG TAPE EDIT RANDOM
MUSIC
LOCATION
USER
TAPE
DECK
B
A
REC/
PAUSE
VOLUME
Preset tuning
This unit can store station frequencies selected by tuning operation. With this function, you can select any desired station by only calling the corresponding preset station number.
Up to 20 stations (10 FM and 10 AM stations) can be stored by using the 10 preset station numbers. (One preset station number can be stored with one FM station and one AM station separately by switching the reception band.)
To store stations(Example: To store a FM station to the preset station number 1)
1 Select the reception band [FM or AM] by pressing the FM/AM button while watching the display.
(In this case, select “FM”.)2 Tune to a desired station.(Refer to the previous page for tuning procedure.)3
4 Select a preset station number to which you will store theselected station by pressing the corresponding preset station number button on the remote control transmitter before the MEMORY indicator goes out.
(In this case, select “1”.)*“P1” will appear on the information display area.*Preset station number can also be selected by pressing the PRESET ( 
/ 
) buttons on the front panel repeatedly.
5 Within about 10 seconds, press the tuner MEMORY button again.
*The MEMORY indicator will stop flashing and light up. It shows the displayed station frequency has been programmed to the preset station number 1.
In the same way, program other FM stations to the preset station number 2 to 10.
Note
The preset station number 10 is shown by “0” on the display.Store desired AM stations in the same wayAM stations can also be stored to the preset station numbers 1 to 10 in the same procedure described above.