Yamaha GX-3 Timer play, HOW TO USE THE BUILT-INTIMER, HOUR, POWER, POWER, DISPLAY, DISPLAY, TIME ADJ, DECK A/B, DECK A/B, MIN TIMER, For tuner:, ➁Current time

HOW TO USE THE BUILT-IN TIMER

POWER HOUR MIN TIMER

DISPLAY TIME ADJ

Input selector buttons

DECK A/B

Input selector buttons

POWER	CD	TUNER	TAPE
POWER
1	2	3	FM/AM
1	2	3
4	5	6
4	5	6		DISPLAY
7	8	9	DISPLAY
7	8	9
0		+10	SLEEP

0CD/TUNER

PLAY/PAUSEAUX

STOP	TIME	REPEAT
PROG	TAPE	EDIT RANDOM
MUSIC
LOCATION
USER
		TAPE
	DECK
	A	B
		DECK A/B
PAUSE
REC/
	VOLUME

Timer play

By using the built-in timer, you can set the time when the unit turns on and a source begins playing automatically, and the time when the unit turns off automatically.

1 Prepare the source to be played.

For tuner:

Tune in to the station you will listen to.

For tape deck:

Load a tape into the cassette compartment, and select the tape by pressing the DECK A/B button so that the corresponding indicator lights up.

For CD player:

Load a disc on the disc table.

2 Press the DISPLAY button.

Whenever the DISPLAY button is pressed, the display mode changes as follows.

At each mode, make a setting for the timer play, referring to the setting procedure described below.

→➀ Frequency display

(Only when the tuner is selected)

→

➁Current time

Check to be sure that the current time is correct.

→

➂Source selecting mode(CD, TAPE, TUNER SELECT)

Select the source (TAPE, TUNER or CD) to be played by pressing the corresponding input selector button.

	→
➃ Time setting mode (ON TIME)
Set to the time when you want to begin the timer
play by pressing the HOUR button and the MIN
button with the TIME ADJ button kept being
pressed.	→

➄Time setting mode (OFF TIME)

Set to the time when you want to finish the timer play (to turn this unit off) by pressing the HOUR button and the MIN button with the TIME ADJ button kept being pressed. Even if you do not set the time, it has already been set so that the timer play finishes after 1 hour.

*The display mode will be changed to the display of a normal source listening mode after about 8 seconds elapse automatically. If the mode is changed before the setting is completed, call the mode again by pressing the DISPLAY button once or more.

3 Press the TIMER button so that “TIMER” appears on the display.

4 If you will not use this unit until the timer play begins, turn the power off by pressing the POWER switch.

E-32