TUNING OPERATION

To recall a preset station

English

TAPE DECK OPERATIONDetection holeTab

1 Select the reception band (FM or AM) of the station you want to recall by pressing the FM/AM button while watching the display.

2 Select the preset station number to which the station is stored by pressing the preset station number buttons on the remote control transmitter or the PRESET / buttons on the front panel.

Notes

•A new setting can be stored in place of the former one of the same reception band.

•If the AC supply lead is disconnected from the AC outlet or the power is cut due to temporary power failure, the memory may be erased. If so, it can be re-programmed by simply following the Preset tuning steps.

General information

•Do not use C-120 tapes or poor-quality tapes, since they can cause malfunctions.

•Before loading a tape into the cassette compartment, tighten the tape slack with a pen or pencil.

•Tapes have removable tabs which prevent accidental recording or erasing from taking place. Removing the tab on the top left protects the side facing you from erasure. Cover the tab holes with adhesive tape to erase or record again.

•This deck is a Double Cassette Deck with Automatic Reverse Function.DECK A: Playback only.DECK B: Playback or recording.

•This deck features an auto tape selector. Just load the tape, and the tape formula being used will be sensed automatically.

•This unit can play back metal tapes as well as normal or chrome tapes, and recording can also be done on metal tapes.

•When covering erasure prevention tab holes, do not cover the chrome and metal detection holes. Otherwise, the deck will treat tape as normal tape.

•Do not press the EJECT button during playback or recording.

E-17