PRECAUTIONS: READ THIS BEFORE OPERATING YOUR UNIT

English

CAUTION FOR CARRYING THIS UNIT

Be sure not to carry or tip this unit with a disc remaining in it.

The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off.

VOLTAGE SELECTOR

The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply.

Voltages are 110-120/220-240V AC, 50/60 Hz.

WARNING

To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

CAUTION 1

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

CAUTION 2

As the laser beam used in this unit is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

Laser component in this product is capable of emitting radiation exceeding the limit for Class 1.

PLACING THE SYSTEM

Placing examples

TCD-GX3KMA-GX3

Laser Diode Properties

•Material: GaAlAs

•Wavelength: 780nm

•Emission Duration: continuous

•Laser Output: max. 44.6µW*

*This output is the value measured at a distance of about 200mm from the objective lens surface on the Optical Pick-up Block.

•If the system is put in a rack, allow a space of at least 5 cm (1-15/16”) above and behind the system for proper ventilation.

•Disconnect the AC supply lead from the AC outlet before connecting or disconnecting any component.

KMA-GX3TCD-GX3

E-3